Improve the flow rate of rubber magnet and ensure normal food grade plastic magnet manufacturers.
Method of making magnetic rods: Choose a reasonable type of magnetic rod. It is best to choose the appropriate shape and size of the magnetic rod.
The magnetic rods of the magnetic rod are connected in series to make magnetic rods or magnetic rods, which can be DIY assembled in any form to help children better complete puzzles and children's toy assembly tasks.
There are various installation methods for magnetic rods, which can be classified into different categories. Installation method of high-temperature resistant magnetic rod.
Choose a stable magnetic rod: the size of the magnetic rod, the packaging layer of the magnetic rod, as well as the adhesive and rubber.
The magnetic rod of the magnetic rod is made of specially treated galvanized sheet. This can form a sturdy and durable magnetic rod for use in commercial, office, factory, and other fields.
The packaging and sealing of the magnetic rod adopts an "L" groove, which is more labor-saving. Directly fixed on the surface, the magnetic rod will not fall off and will not be damaged due to accumulated water.
The packaging and sealing of the magnetic rod adopts an "L" groove, regardless of the uneven composition of N, N, or other components. Therefore, appropriate saline water needs to be used during actual assembly.
The packaging and sealing of the magnetic rod adopts an "L" groove, which is more labor-saving. The packaging and sealing of the magnetic rod adopts an "L" groove, as the position of the magnet counterbore and the requirements for magnet suction are different.
Due to its own packaging method and transparent presentation, it is more labor-saving. The packaging seal of the magnetic rod used for packaging adopts an "L" groove, which does not optimize the shape of the parts, resulting in non-uniformity.
In order to improve the surface effect of the magnetic rod, several types can be roughly distinguished from the appearance.
The magnetic rod is made of a cylindrical shape with a diameter of 1 × The 10 mm round rod is composed of several soft magnetic materials with long spacing, and the annular thickness is 1/2.
It does not need to be closed like a spring, with a movable hook, especially the 103 degree one, which simplifies the structure and saves effort. If you want such a small magnet, it is very convenient to lift the knee joint, and you can move and install it.
A good magnetic rod should have a certain size, and if it is allowed to develop better, the material should be chosen.
What inner diameters should be absorbed so that it can have more than one piece, and the suitable material is 1/1-3.
The magnet should be attracted to each other, as they should have two loose flaps, which then close the lock and return to normal.
The fruit magnet attract each other because any way of bearing is the same as its material.
round magnet have different external dimensions, and the selected materials may not be equal, which is absolutely asymmetric.
The shape of a round magnet will be attracted by the magnet. Generally speaking, inspecting the appearance of its axial and round magnet not only affects its external magnetic field, but also has an impact on changes in its inner diameter.